VALVOLINE INC -- PREMIUM STARTING FLUID  -- 6850-00N023049
<pre>=====================  Product Identification  =====================

Product ID:PREMIUM STARTING FLUID
MSDS Date:07/19/1989
FSC:6850
NIIN:00N023049
=== Responsible Party ===
Company Name:VALVOLINE INC
Box:14000
City:LEXINGTON
State:KY
ZIP:40512
Country:US
Info Phone Num:800-274-5263
Emergency Phone Num:800-274-5263
CAGE:GO029
=== Contractor Identification ===
Company Name:VALVOLINE INC
Box:14000
City:LEXINGTON
State:KY
ZIP:40512
Phone:(606) 268-7000
CAGE:GO029
Company Name:VALVOLINE OIL CO
Address:3499 BLAZER PKY
Box:14000
City:LEXINGTON
State:KY
ZIP:40512
Country:US
Phone:606-357-7206 / 800-274-5263
CAGE:72527

=============  Composition/Information on Ingredients  =============

Ingred Name:CARBON DIOXIDE
CAS:124-38-9
RTECS #:FF6400000
Fraction by Wt: 1-10%
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL;93

Ingred Name:HEPTANE
CAS:142-82-5
RTECS #:MI7700000
Fraction by Wt: 55-70%
OSHA PEL:500 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9293

Ingred Name:ETHANE, 1,1'-OXYBIS-; (ETHYL ETHER). BP:94.0F,34.4C. VP:439
    MMHG @ 68F.
CAS:60-29-7
RTECS #:KI5775000
Fraction by Wt: 25-40%
OSHA PEL:400 PPM;500 PPM STEL
ACGIH TLV:400 PPM;500 PPM STEL
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:HEXANE
CAS:110-54-3
RTECS #:MN9275000
Fraction by Wt: 1-10%
OSHA PEL:500 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:PRLNG/RPTD CONTACT MAY
    CAUSE MOD IRRIT, DEFAT, DERM. EYES:MAY CAUSE SEVERE IRRIT, REDNESS,
    TEARING, BLURRED VISION. INGEST:MAY CAUSE GI IRRIT, NAUS, VOMIT &
    DIARR. ASPIR OF MATL INTO LUNGS  MAY CAUSE CHEM PNEUMONIA WHICH MAY
    BE FATAL. INHAL:EXCESSIVE INHAL OF VAPS MAY CAUSE NASAL & RESP
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:IRRIT, CNS EFFECTS INCLUDING DIZZ,
    WEAKNESS, FATG, NAUS, HDCH & POSSIBLE UNCON & EVEN ASPHYXIATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN:THORO WASH EXPOSED AREA W/SOAP & H*2O. REMOVE CONTAM
    CLTHG & LAUNDER BEFORE REUSE. EYES:FLUSH W/LG AMTS OF H*2O FOR @
    LST 15 MIN, LIFTING UPPER & LOWER LIDS OCCAS, GET MD. INGEST:DO NOT
    INDUCE VO MIT, KEEP PERS WARM & QUIET & GET MD. ASPIR OF MATL INTO
    LUNGS DUE TO VOMIT CAN CAUSE CHEM PNEUM WHICH CAN BE FATAL.
    INHAL:REMOVE INDIVIDUAL TO FRESH AIR. IF BRTHG DFCLT, ADMIN O*2. IF
    BRTHG (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:<-58F,<-50C
Lower Limits:1%
Extinguishing Media:REGULAR FOAM OR CO*2 OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED POSITIVE PRESSURE
    DEMAND SCBA & FULL PROTECTIVE EQUIPMENT. .
Unusual Fire/Explosion Hazard:NEVER USE WELDING/CUTTING TORCH ON/NEAR
    DRUM (EVEN EMPTY) BECAUSE PROD (EVEN JUST RESIDUE) CAN IGNITE
    EXPLOSIVELY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SM SPILL:ALLOW TO EVAPORATE. VENT AREA. ELIM
    ALL SOURCES OF IGNIT SUCH AS FLARES, FLAMES (INCL PILOT LIGHTS) &
    ELEC SPKS. LG SPILL:ELIM ALL IGNIT SOURCES (FLARES, FLAMES, INCL
    PILOT LIGHTS, ELEC SPKS) . ALLOW TO EVAP. PERSONS NOT WEARING PROT
    (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:CNTNRS OF MATL MAY BE HAZ WHEN EMPTIED. SINCE EMPTIED
    CNTNRS RETAIN PROD RESIDUES (VAP, LIQ &/OR SOLID), ALL HAZ PRECS
    GIVEN IN THIS MSDS MUST BE OBSERVED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF WORKPLACE EXPOS LIMIT OF PROD/ANY COMPONENT
    IS EXCEEDED, NIOSH/MSHA APPRVD AIR SUPPLIED RESP IS ADVISED IN
    ABSENCE OF PROPER ENVIRON CONTROL. OSHA REGS ALSO PERMIT OTHER
    NIOSH/MSHA APPRVD RESPS (NE G PRESS TYPE) UNDER SPECIFIED (SUPDAT)
Ventilation:PROVIDE SUFFICIENT MECH (GEN &/OR LOC EXHST) VENT TO
    MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:NOT REQUIRED UNDER NORMAL CNDTNS OF USE.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:HAS STOPPED GIVE ARTF RESP. KEEP PERS WARM, QUIET & GET
    MD. SPILL PROC:EQUIP SHOULD BE EXCLUDED FROM AREA UNTIL LEAK HAS
    BEEN REPAIRED. RESP PROT:CONDITIONS. ENGINEERING OR ADMINISTRATI VE
    CONTROLS SHOULD BE IMPLEMENTED TO REDUCE EXPOSURE.

==================  Physical/Chemical Properties  ==================

HCC:G2
Boiling Pt:B.P. Text:SEE ING 3
Vapor Pres:SEE ING 3
Vapor Density:HVR/AIR
Spec Gravity:< H*2O
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:COMP GAS
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS; CO*2 & CO,
    VARIOUS HYDROCARBONS, ETC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULTATIONS . SM SPILL:ALLOW MATL TO EVAPORATE. LG SPILL:VENTILATE
    AREA OF SPILL. ALLOW MATL TO EVAPORATE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.