SULTAN CHEMISTS INC -- TIN (IV) OXIDE  -- 6810-00F039652
<pre>=====================  Product Identification  =====================

Product ID:TIN (IV) OXIDE
MSDS Date:09/14/1992
FSC:6810
NIIN:00F039652
=== Responsible Party ===
Company Name:SULTAN CHEMISTS INC
Address:85 W FOREST AVE
City:ENGLEWOOD
State:NJ
ZIP:07601-5000
Country:US
Info Phone Num:201-871-1232
Emergency Phone Num:201-871-1232
CAGE:63536
=== Contractor Identification ===
Company Name:SULTAN CHEMISTS INC
Address:85 W FOREST AVE
Box:City:ENGLEWOOD
State:NJ
ZIP:07631-4001
Country:US
Phone:201-871-1232
CAGE:63536

=============  Composition/Information on Ingredients  =============

Ingred Name:TIN OXIDE, STANNIC OXIDE   * 95-1 *
CAS:18282-10-5
RTECS #:XQ4000000
Fraction by Wt: 100%
Other REC Limits:NUISANCE (DUST)

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: ABRASIVE MATERIAL MAY CAUSE
    IRRITATION. INHALATION: CHRONIC EXPOSURE TO FUMES/DUST/TIN OXIDE
    FUMES MAY RESULT IN STANNOSIS, A FORM OF PNEUMOCONIOSIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/RUNNING WATER FOR 15 MINS. SKIN: FLUSH W/SOAP &
    WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:NON COMBUSTIBLE
Extinguishing Media:SUITABLE FOR SURROUNDING FIRE
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS &
    PROTECTIVE CLOTHING TO PREVENT CONTACT W/SKIN & EYES.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR SELF CONTAINED BREATHING APPARATUS,
    RUBBER BOOTS & HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG & HOLD
    FOR WASTE DISPOSAL. AVOID RAISING DUST & VENTILATE AREA & WASH SITE
    AFTER MATERIAL PICKUP I S COMPLETE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN ORIGINAL CONTAINERS & KEEP
    TIGHTLY CLOSED.
Other Precautions:DON'T GET IN EYES, ON SKIN/ON CLOTHING. DON'T BREATHE
    DUST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF DUSTING IS A PROBLEM, WEAR AN APPROVED DUST
    MASK.
Ventilation:LOCAL EXHAUST, MECHANICAL (GENERAL)
Protective Gloves:HEAVY RUBBER GLOVES
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:WORK CLOTHES, RUBBER BOOTS, SCBA
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:SUBLIMES
Melt/Freeze Pt:M.P/F.P Text:>2552F
Vapor Pres:NEGLIGIBLE
Spec Gravity:6.95
pH:7
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE/SLIGHTLY GRAY POWDER W/NO ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & BASES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURY IN A LANDFILL SITE APPROVED FOR DISPOSAL OF
    CHEMICAL & HAZARDOUS WASTE. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE
    & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.